To eliminate the common faults of the disc granulator, follow the following steps:

1. Molding difficulty: Check the fineness of raw materials, water content, the addition of adhesive components, the rotation Angle and speed of the disk to ensure that they are within the appropriate range.

2. Uneven particles: Adjust the moisture content of raw materials and the inclination of the disk to improve particle forming.

3. Excessive tilt of the disc: Change the position and Angle of the reducer by adjusting the bolts at the bottom of the disc to adapt to the forming of the spherical particles.

4. Intermittent operation: check whether the bearing is damaged, whether the disk body is weightless, whether the motor voltage is abnormal, and timely maintenance.

5. Equipment maintenance: Periodically check the tightness and wear degree of each component, and timely adjust or replace the damaged or severely worn parts.

6. Lubrication maintenance: Add lubricant to each moving part of the organic fertilizer equipment to maintain a good state of use.

7. Safe operation: Before operation, you must wear protective equipment, such as gloves, glasses, masks, etc., and strictly abide by the operating procedures.

8. Fault diagnosis: For the main motor system fault, transmission system fault, screw process section fault and underwater granulation system fault, should be investigated and solved one by one.

9. Daily maintenance of pelletizer: including the main mixing seal, reducer maintenance, cutting parts maintenance, belt inspection and replacement, moving parts of the solid inspection, bearing lubrication and equipment surface cleaning.

Through the above measures, the common faults of the disc granulator can be effectively eliminated to ensure the normal operation and production efficiency of the equipment.