1. Raw material pretreatment: Ensure the homogenization of raw materials to facilitate the action of microorganisms and the release of nutrients. In the pretreatment stage, some auxiliary materials can be added to make the raw materials more suitable for the subsequent fermentation process by adjusting the carbon to nitrogen ratio, pH, water content, etc.

2. Regular stacking and mixing: to ensure the uniformity and ventilation of fermentation materials. In the operation of the tipping machine, the raw material pellets are fully contacted and mixed with the air, and a large amount of fresh air can be contained in the pile, which helps the aerobic microorganisms to actively produce fermentation heat and the pile temperature rises.

3. Improve the permeability of the raw material pile: the pile turning system can process the material into small clumps, making the sticky and dense raw material pile fluffy and elastic, forming a suitable porosity.

4. Adjust the water content of the raw material pile: the appropriate water content of the raw material fermentation is around 55%, and the water standard of the finished organic fertilizer is below 20%. In fermentation, the biochemical reaction will generate new water, and the consumption of raw materials by microorganisms will also cause the water to lose its carrier and free out

5. Automatic discharge system: By setting the automatic discharge system, the frequency of use of the forklift is reduced and production costs are saved. The compost fermentation dump machine itself is similar to a moving chain plate dump machine, so a bin can be set up at the discharge end to collect the decomposed material, and then the material is transported to the designated place through the belt conveyor below, to achieve automatic discharge.

Through the above measures, the operation of the fermentation pile turning machine can be optimized, its working efficiency can be improved, production costs can be reduced,