The organic fertilizer crusher uses the weight of the material itself to fall into the high-speed rotating chain in the crushing chamber of the vertical crusher through the feed port, and the material is thrown to the inner wall of the cylinder by the centrifugal force of the vertical crusher rotor, so under the combined action of the counter-elasticity and gravity, the crushing material rotates rapidly in the vertical crusher chamber.

At the same time, the material falls down, violently collides with the counter plate installed on the inner wall of the vertical crusher and collides with the material, causing the material to break or produce a large number of cracks; Then the material enters the first layer of the vertical grinder grinding chamber, the material is spirally falling, by stamping, extrusion, the use of cracked material is further broken, and then the refined material continues to migrate downward, and enters the second layer of the vertical grinder grinding area.

The material was not only crushed by the impact of the organic fertilizer equipment, but also crushed by grinding. Due to the resistance generated by the inlet and outlet of the grinding area, the powder is in a closed grinding state in this area, so that the material can reach a fineness below the millimeter level.

When the organic fertilizer grinder works, the material enters from the feed port, colliding with the high-speed chain or blade in the organic fertilizer grinder shell, the material will be squeezed and broken after the impact, and then impact the inner wall of the shell and collide with the hammer head, so that the raw material in the process of falling after several impacts until it becomes a powder or fine particles, The process is complete when it comes out of the discharge port in the lower part of the crusher.