Welcome Visite our Factory!

Our Industry Info

Organic fertilizer granulator how to avoid wall sticking

2023/12/16

In the production process of organic fertilizer granulator, if you do not pay attention to the control of certain process parameters and operating conditions, it is easy to appear wall sticking phenomenon, which will not only affect the production efficiency, but also increase the maintenance cost of organic fertilizer equipment. The following are some methods for organic fertilizer granulators to avoid wall sticking:

1. Adjust the water spraying device: In the production process of the organic fertilizer granulator, the parameters of the water spraying device are set reasonably, such as the amount of water spraying, water spraying time, etc., which can effectively prevent the material from sticking to the wall. The sprinkler device should be evenly sprayed to avoid local excessive wet or dry.

2. Control water content of the material: too high water content of the material is easy to lead to wall adhesion, so the collection, storage and transportation process of the material should be reasonably controlled to ensure that the water content of the material is within the appropriate range.

3. Adjust the feeding speed: Too fast feeding speed may cause the material to wash the wall instantaneously in the body, resulting in sticky walls. The feeding speed should be reasonably adjusted according to the production demand and equipment capacity.

4. Regular cleaning and maintenance: During the use of organic fertilizer pelletizer, regularly clean up dust and dirt inside and outside the body to ensure that the equipment is clean inside and outside and reduce the possibility of sticking to the wall. At the same time, check and maintain the sprinkler regularly to ensure its normal operation.

5. Optimize the process flow: rationally design the process flow to avoid the material staying in the body for too long and reduce the chance of sticking to the wall.

Through the comprehensive application of these measures, the phenomenon of sticky wall can be effectively reduced and the production efficiency and product quality of organic fertilizer production line can be improved.