The most easily worn parts on the organic fertilizer production line mainly include the following aspects:

1. Bearing: bearing bears all the load of the machine, good lubrication has a great relationship to the bearing life.

2. Gear: If there is impact sound in the operation of the rotating gear, the inspection should be stopped immediately and eliminated to avoid further wear.

3 Belt and chain: belt and chain are key components in the transmission system, need to check the degree of wear regularly, and timely replacement of severely worn parts.

4. Movable bearings and sliding surfaces: these parts are also easy to wear in the organic fertilizer production line, requiring regular inspection and lubrication.

5. Wearing parts: including some parts that are often in contact with the material, such as mixing blades, crusher hammer, etc., need to pay special attention to wear and replace in time.

6. Electrical components: Some components in the electrical control system, such as contactors, relays, etc., may also suffer wear and damage due to frequent operation.

7. Sealing parts: Sealing parts play an important role in preventing material leakage and keeping the internal clean of organic fertilizer equipment, but they are also easy to be damaged by material wear and aging.

In order to ensure the normal operation of the organic fertilizer production line and extend the service life of the equipment, regular inspection and maintenance of these easily worn parts is very necessary. By replacing worn parts in time and maintaining good lubrication, the failure rate and maintenance costs of the equipment can be effectively reduced.