No matter what equipment, there will inevitably be some failures in the organic fertilizer production process. Perhaps because of the quality of the equipment, perhaps because of improper use, or because of wear and tear of parts due to long-term use, organic fertilizer equipment will have some failures after a long time. How to find out the fault of organic fertilizer equipment? What is the cause of the failure?
Causes of failure: ①The bearing is poorly lubricated or severely worn; ②The fan blade falls off or is worn; ③The switch circuit is in poor contact, or the line is disconnected and runs single-phase; ④The voltage is too low.
2. The sound of the organic fertilizer equipment is abnormal during operation, the cylinder is blocked by obstacles, and even the cylinder cannot be rotated, and the bottom box vibrates.
Causes of failure: ①It is stuck by the object in the bottom box; ②The magnetic block falls off, making the cylinder rattle, and in severe cases, the cylinder skin will be scratched.
3. The reducer is overheated
Causes of failure: ① insufficient oil quantity or poor oil quality; ② excessive wear of gear and worm, or poor meshing; ③ poor bearing lubrication or serious wear.
Causes of failure: ①The temperature is too high; ②The sun exposure; ③Acid and alkali corrosion. Can be measured with a gauss meter.
In order to reduce the failure rate, it is necessary to pay attention to maintenance and maintenance before normal use, so as to prolong the overall service life of the equipment. Reasonable maintenance. After each work, the organic fertilizer equipment must be inspected and maintained. The main focus is on the transmission part, the lubrication part and the cleaning of the residual material. The maintenance is the last word that the organic fertilizer equipment can be used for a long time.
