Before the organic fertilizer granulator machine, it is fermented and crushed according to the demand. The semi-wet material mill meets the needs of milling. Recently, several customers reported that the efficiency of the semi wet material crusher machine purchased was very low, and the output was unreasonably high. According to the situation reported by customers, we have been conducting detailed research. In this position, we have completed several production methods of semi wet material crusher for improving organic fertilizer production equipment, and hope you can help us.
1. Excessive hardening of materials, excessive damage, and excessive polishing of equipment. The breaking speed is fast and the breaking capacity is relatively small. This is the material we choose according to our needs.
2. The viscosity of the material is high and the construction is convenient. The high-viscosity material is coated on the inner wall of the cavity with an adhesive. It is impossible and time-consuming to clean, and the second impact is the working efficiency of the pulverizer and the normal operation of the semi-wet material pulverizer.
3. In the process of organic fertilizer production, when the water content in the material is too high, the material is easy to block in the semi-wet mill, and the material is easy to block during the transportation process, resulting in a decrease in the breaking capacity. To solve this problem, first of all, when we choose materials, we care about the temperature of the materials. If the temperature of the material is too high, it can be used in the sun or in the wind, and the moisture content in the material is low.
4. When selecting materials, please pay attention to the high viscosity of the materials.
5. The precision requirement of the material after foundation crushing is very high, the raw material is crushed quickly, and the crushing capacity is small. Detailed requirements are available for this direction. No special requirements, but the material accuracy is in the middle.
6. Semi-wet materials have good compression resistance, large crushing capacity, poor wear resistance, and strong impact crushing capacity. In this regard, it is imperative to repair the damaged parts of the semi-wet material pulverizer. If damaged or broken, it can be replaced at any time.
